Kestrel 1000 Pocket Wind Speed Meter
Couldn't load pickup availability
With just three buttons to operate, the Kestrel 1000 handheld wind meter can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort.
If you are looking for an easy to use handheld wind speed meter (anemometer) that is durable, waterproof, floats and is accurate, look no further than the Kestrel 1000. Designed and built in the USA, the Kestrel 1000 is the preferred handheld anemometer from crane operators to kite boarders. Like all of our Kestrel Instruments, they are made in the USA, extremely durable and backed by a full 5 year factory warranty. All Kestrel Instruments are waterproof, drop-proof and they float.
I appreciated receiving the Kestrel 1000 in 2-3 days so that important measurements could be made in a narrow time window of opportunity. The unit worked well and quantitatively showed that there was a problem with room ventilation which we subsequently diagnosed. Having good air velocity data to back up conclusions was important in convincing others.
Extreme Meters customer: William H.
Features:
- Simple 3-Button Control
- High Contrast, Sunlight Readable Monochrome LCD Display
- CR2032 Coin Cell Battery (Average Life 300 Hours)
- Data Hold Function
- Drop-Tested to MIL-STD-810G
- Waterproof to IP67 (3'/1M for 30 minutes)
- Kestrel Certificate of Conformity
- Neck Lanyard
- Patented Impeller and Sensor Technology
- Slip-On Protective Cover
- User-Replaceable Battery
- User-Replaceable Impeller
- Waterproof & Floats
- Designed and built in the USA
Physical Dimensions:
- Weight: 2.3 Ounces / 65 Grams
- Size: 4.8 x 1.7 x 0.7 in. / 122 x 42 x 18 mm
Measurement |
---|
Sensor Specifications
Wind Speed |
|
Selections: | mph | kt | B | m/s | ft/min / km/h |
Specification Range: |
|
Operational Range: |
|
Resolution: |
|
Accuracy (+/-): | Larger of 3% of reading, least significant digit or 20 ft/min |
Notes: | 1 inch|25 mm diameter impeller with precision axle and low-friction Zytel® bearings. Startup speed stated as lower limit, readings may be taken down to 0.4 m/s | 79 ft/min | 1.5 km/h | .9 mph | .8 kt after impeller startup. Off-axis accuracy -1% @ 5º off-axis; -2% @ 10º; -3% @ 15º. Calibration drift < 1% after 100 hours use at 16 MPH | 7 m/s. Replacement impeller (PN-0801) field installs without tools (US Patent 5,783,753). Wind speed calibration and testing should be done with triangle on impeller located at the top front face of the Kestrel. *F/S only in Ballistics units. Beaufort not available in Ballistics units. |
Downloads: